![]() I have got trouble my my Alienware Aurora, all start with BSODs(produced by the graphic card) and after calling the technical support they changed it. But then, the pc started to reboot randomly which happens currently. Oracle data integrator 10g installation guide. The problem is that there is not a BSOD associated to this crash, neither a minidump file or in the LiveKernelReports folder. Re: Kernel-Power – Event ID 41 – Pls help. Is this a computer, or a laptop? I would be checking your hardware – this includes making sure the cpu cooler is firmly and correctly attached. Mostly these messages appeared in the Windows event log: - event ID 37: kernel processor power (the speed of the CPU is limited by the system firmware) - event ID 19: WHEA logger (processor core, exception when checking the computer, unkonwn error) - event ID 18: WHEA logger (processor core, critical hardware failure, unknown error). ![]() So this way I cannot explain the issue to technical support in an 'technical way'. This crash only appear in the windows event viewer being the following. I have restored windows 7 twice, the preinstalled partition that the computer brought from Dell the second time was last Wednesday(December 2011 7[SUP]th[/SUP]),updated the BIOS and the drivers but I cannot fix the problem. I have been reading about this same problem in this forum as well as others, but almost all the solutions given I have already tried without solving the issue( such as changing to high performance,reseating the RAM sticks,disabling AMD HDMI output.). I have read the MSDN for this topic ( ), being useless in order to figure out what’s happening. I have noticed also that when this error happens, in windows system propierties appears 3GB(1.99GB availaible) and using the resource monitor there is 1GB reserved for hardware. Thanks in advance!!! I attach my PC features using CPU-Z. Event Id 41 Kernel PowerI am getting a lot of warnings like the one below. Any ideas how to fix it? I am getting it on a ProLiant BL460c G6 installed in an HP C7000 chassis with Windows Server 2008 x64 R2. This is a Hyper-V server with 2 x Quad-Core Intel Xeon, 2267 MHz and 24G of RAM. ======================= Log Name: System Source: Microsoft-Windows-Kernel-P rocessor-P ower Date: 5/19/2010 1:35:54 PM Event ID: 37 Task Category: (7) Level: Warning User: SYSTEM Description: The speed of processor 15 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 1 seconds since the last report. To solve this error, do the following: 1.In Windows, check your Power Options. Make sure that your Power Scheme is set to High Performance, and check that every option is set to “Always On”. 2.Make sure you have installed all latest drivers and firmware, especially for your motherboard and CPU. 3.Reboot your computer and go to your BIOS settings. Make sure that your power settings are set to maximum. This differs from coputer to computer. In case the error occurs on a HP server, you should set in the Minimum Processor Idle Power State “No C-states”: 1.Enter BIOS by pressing F9 on POST 2.Navigate to “Power Management Options” => “Advanced Power Management Options” =>
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |